Linksys Velop Blue Light No Internet

As a technician, I have seen many problems with Linksys routers. One such problem is Linksys Velop blue light but no internet issue. If you are facing the same issue then don’t worry in this post you will find a good working solution for it.

In this post, we are going to check all possible causes that can create this issue “Linksys Velop blue light no internet“. I will shortly explain what it means and how you can fix it easily and effectively.

So without further ado let’s solve your problem.

What does the Linksys blue light indicate?

We have 9 types of light indication on Linksys Velop, but in this case, when it comes to blue light there are two situations: a solid blue light and a blinking blue light.

Solid Blue Light:

It means the Linksys Velop is connected to the internet the router is online and everything is working perfectly.

However sometimes when the connection is unstable you can experience the Linksys Velop blue light, but no internet issue.

Blinking Blue Light:

It means the node is trying to establish an internet connection, the blinking light indicates the node is in setup mode and it’s ready to be configured. Or the Wi-Fi Protected Setup (WPS) pairing is in progress.

Usually, Linksys node blinking blue light is not a big issue until and unless it starts blinking unexpectedly.

What is causing the Linksys Velop blue light?

Most often the blue light on Linksys Velop means that everything is good and the system is working properly or the node is ready to configure, but still when there is no Internet connection it can be due to:

1. Linksys Velop requires a firmware update.
2. You have made some incorrect settings or the configuration of your node is not completed correctly.
3. Unstable modem connection, which means the node is connected properly but your modem is losing connection.

But don’t worry we can fix this problem easily. These are the solutions I use when I see this Linksys Velop blue light no internet issues.

How to fix the Linksys Velop Blue Light But No Internet

We can solve this Linksys Velop blue light no internet issue very easily. Follow the step-by-step troubleshooting tips below.

1. Restart your Modem and Linksys Velop device

The easiest way to resolve the connectivity issue is to restart your modem and Velop device. A restart will help your modem and Velop device regain their performance.

Sometimes just restarting your network devices is enough and your problem gets resolved, also restarting the network devices can help you process the troubleshooting steps easily.

Follow the following steps to restart correctly:

1. Switch off both the modem and your Linksys Velop node.
2. Wait for 2-3 minutes to cool down your devices.
3. After 2-3 minutes first boot your modem and give it some time to boot up properly.
4. After that, switch on your Linksys Velop device, and after it boots up properly test your internet connection.

If restarting doesn’t solve your problem and you still facing a Linksys router blue light, but no internet then try the following solutions.

2. Disable IPv6 on your Linksys Velop device

If restarting your network devices doesn’t work for you then you can try Disabling IPv6 on your Linksys Velop device.

Here is step by step guide on how you can easily disable IPv6 on your Linksys device:

1. You can use a smartphone or your computer for this, just make sure it’s connected to the Linksys Velop network.
2. Then open a browser enter 192.168.1.1 on your browser’s URL bar, and hit enter to access the Linksys Velop admin dashboard.
3. Here you have to fill in your Username and Password. In case you haven’t changed the default credentials the default username will be “admin” and the password field will be left blank.
4. After you log in to the dashboard successfully, select the “Connectivity” option.
5. Now go to the Internet Settings tab.
6. Choose IPv6 settings, and here you can see an option to enable and disable the IPv6 option.
7. Uncheck the “IPv6 – Automatic” box to turn off the IPv6.
8. Now just save the settings, and let the Linksys Velop device reboot properly during this process.

Important Notes:

• If you are not sure whether to disable IPv6 or not, you can contact the Linksys Velop Support team and ask them.
• In some cases disabling the IPv6 option may affect your services or devices on your network. In that case, if you experience any issues you can follow the steps as shown above to re-enable the IPv6 settings.

3. Check and Update Linksys device Firmware

If you haven’t updated your device’s firmware for a longer time, then you might face such connectivity issues.

You should update the firmware of your Linksys device only when it’s required. This ensures that your device is running optimally and is equipped with the latest security patches.

Here are the steps to check and update your firmware:

1. You can use a smartphone or your computer for this, just make sure it’s connected to the Linksys Velop network.
2. Then find out the firmware update section and check if there’s any update available or not.
3. If there is an update available then you have to update it, just follow the instructions shown on the screen and update your firmware.
4. After updating successfully your Linksys Velop device might restart then wait for it to boot successfully and if it doesn’t restart automatically then you have to do it manually.

I hope updating firmware will solve your Linksys Velop blue light but no internet issue, but if it is still not solved try the next solution.

4. Disable the HomeKit Integration feature

If you are an Apple user and like to manage your Linksys Velop system through the Apple Home app then you can try to disable the HomeKit integration feature. It can also fix the issue sometimes.

Follow these steps to turn off the HomeKit integration feature on your Linksys Velop device:

1. Connect your iOS device to the Linksys Velop network and launch the Linksys Velop app.
2. Once you are in the app dashboard, tap on the Router Settings icon.
3. Now scroll down and you can see Apple HomeKit, click on it.
4. Then you can able to see the status of your HomeKit integration. Simply click on the toggle switch to disable the HomeKit integration for your Linksys Velop device.
5. Now check your internet connection.

Important Note:

• Disabling HomeKit will prevent you from managing your device through the Apple Home app. Re-enable it if necessary.

5. Reset Your Linksys Velop Device

Resetting your Linksys Velop device might be the final option you can try if all the above solutions don’t work for you.

Resetting your Linksys Velop device to factory default settings will erase all custom settings. You will need to reconfigure your device afterward.

Here are step-by-step guides to successfully reset your Linksys Velop device:

1. Locate the reset button on your Linksys Velop device.
2. Press and hold the reset button for about 10 to 15 seconds using a paper clip or pin.
3. Release the button until the LED light on the node changes to red, fades, and eventually flashes a bright red, indicating that the device is resetting.
4. Wait for the device to reboot. This may take a few minutes.
5. Once the device has restarted, it will be in its factory default settings. You can now reconfigure your device as per your requirements.

Sometimes we get an orange light on Linksys or a red light on Linksys with no internet, in that case also you can try to reset your Linksys Velop device.

Important Note:

• Resetting the device will erase all your custom settings. Make sure to back up any important configurations before proceeding with the reset.

Frequently Asked Questions

What does the blue light mean on Linksys?

A solid blue light means the device is connected to the internet and functioning correctly. A blinking blue light indicates booting up or setup mode.

Why is my Linksys Velop stuck on a blue light?

It may be due to connectivity issues between the node and the internet, such as an unstable modem connection, incorrect configuration, or pending firmware updates.

Conclusion

I hope the steps above help resolve the “Linksys Velop blue light no internet” issue. Troubleshooting can be frustrating, but with patience and the right approach, you can often fix the problem yourself. If you need further assistance, contact Linksys Velop support.

Let me know in the comments whether these solutions worked for you!